Minwax Fast-Drying Polyurethane Spray – Clear Gloss, 11.5 oz Aerosol (33050000)

Minwax Fast-Drying Polyurethane offers an exceptionally long-lasting beauty and protective clear finish for your interior wood surfaces. This aerosol spray makes application easy, especially for hard-to-finish pieces such as shutters, frames, trim, crafts, and other small projects. As one of the most durable protective coatings, it shields woodwork, furniture, cabinets, molding, and doors from scratches, spills, and everyday wear.   

The Clear Gloss finish dries fast to protect and beautify, providing a shiny, sleek sheen for a modern look on both finished and unfinished wood. Its long-lasting protective qualities make it ideal for use on hardwood, softwood, and parquet. Trust Minwax, America’s leading brand of wood finishing and wood care projects since 1904.   

Application Directions (Adapted for Aerosol based on general line instructions & typical aerosol behavior):

1. Surface Preparation: Ensure the surface is dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt, or other foreign matter.
2. Sanding: Sand to obtain a smooth, uniform surface. Remove all dust thoroughly (e.g., with a cloth dampened with mineral spirits).
3. Staining (Optional): If desired, apply Minwax stain to unfinished wood surfaces. Follow directions for application and ensure stain is completely dry before applying polyurethane.
4. Shake Can: Shake Minwax Fast-Drying Polyurethane spray can vigorously for about two minutes before use. Continue to shake for 10 seconds occasionally during use.
5. Protect Surroundings: Protect adjacent areas from overspray. Wet overspray can be removed with mineral spirits.   
6. Spraying Technique: Hold the can vertically approximately 12 inches from the surface. Depress the button fully and spray using an even, sweeping motion with slightly overlapping strokes to ensure a continuous film. On unfinished wood, apply sufficient material to seal open joints, edges, and end-grain.   
7. Apply Thin Coats & Recoat: Apply THIN, even coats to avoid runs and sags. It is critical to Recoat within 2 hours. If you cannot recoat within this 2-hour window, you MUST wait a minimum of 72 hours, then lightly sand the surface with fine-grit sandpaper (e.g., 220 grit) and remove dust before applying the next coat. This ensures proper adhesion between layers. (This recoat window is assumed based on typical aerosol polyurethane behavior and previous products in this aerosol line; verify on can if different).
8. Number of Coats: Apply at least three coats on unfinished wood and two coats on surfaces already finished for optimal durability (General recommendation for this product line).
9. Curing: After the final coat, allow 24 hours before subjecting the surface to normal, light use. Full cure and maximum durability will take longer.

Key Features:

• Durable Protection: Creates a hard, clear finish resistant to scratches and spills.  
• Oil-Based Formula (Assumed): Delivers exceptional durability and likely a warm amber tone that enhances wood’s beauty.
• High-Gloss Sheen: Provides a brilliant, shiny, and sleek modern look.
• Fast-Drying with Specific Recoat Window: Follow critical recoat times for best results.
• Aerosol Convenience: Easy spray application for smooth, brush-mark-free results, especially on intricate items.
• Versatile Interior Use: Ideal for furniture, cabinets, molding, doors, crafts, and other wood surfaces.  

Specifications:

• Brand: Minwax
• Product Type: Polyurethane Wood Finish Spray / Aerosol Varnish
• Manufacturer: MINWAX
• Part Number: 33050000
• Item Model Number: Minwax – 027426330504
• UPC: 0274266330504 (Primary, matches model number context)
• Sheen: Gloss
• Color: Clear (Likely imparts a warm amber tone if oil-based)
• Base Type: Oil-based (Assumed for “Minwax Fast-Drying Polyurethane” line consistency)
• Size/Net Weight: 11.5 ounces / 326 g (Pack of 1)
• Recommended Uses For Product: Interior wood surfaces (furniture, cabinets, molding, doors, shutters, frames, trim, crafts, small projects).   
• Application Method: Aerosol Spray
• Dry Time & Recoat: Recoat within 2 hours OR after a minimum of 72 hours (lightly sand surface if recoating after 72 hrs) (Assumed based on typical aerosol polyurethane application & product line consistency; verify on can). Allow 24 hours before normal light use.
• Number of Coats Recommended: At least 3 on unfinished wood, 2 on already finished surfaces (General recommendation).
• Coverage Area: Manufacturer states “100-150 sq. ft./can (unfinished), 150-200 sq. ft./can (finished).” Caution: This stated coverage is exceptionally high for an 11.5 oz aerosol and may be an error. Typical aerosol coverage is significantly less (e.g., 15-25 sq ft). The previous Semi-Gloss aerosol from this line stated 50-60 sq ft. Verify actual coverage on the product can.
• Item Weight (Gross): 408 g (approx. 14.4 ounces)
• Product Dimensions (Can): 20.65 x 6.83 x 6.83 cm (approx. 8.13 x 2.69 x 2.69 inches)
• Cleanup: Mineral spirits for wet overspray.   
• VOC Level: Information Not Provided
• Material (Contents): Polyurethane
• Style: Gloss
• Finish: Gloss
• Item Package Quantity: 1
• Number Of Pieces: 1
• Included Components: 1 x 11.5 oz Aerosol Can of Minwax Fast-Drying Polyurethane, Gloss
• Batteries Included?: No
• Batteries Required?: No
• Warranty Description: 30 DAYS (or as per manufacturer)